Shark Vac Then Steam Mop MV2010 NEW "lose pressure vacuuming" Questions

...pressure release (flap) valve on the back of the vacuum. You have not stated which model vacuum you have. Bipass vacuum have a bipass compartment which is under drive unit. Make sure there are no ...

soap not dispensing soap and water not dispensing each time button is pressed. It isn't cleaning because no soap and very little water coming out. It does leak a lot when stopped and left in one place

lose some of their contact pressure. Use needle nose pliers to slightly rebend them so they make good contact to the trash bin contacts. These contacts feed the vacuum motor inside the trash bin. That

windshield washer will not squirt first check that pump activates from the dash control and you can hear the small motor under the reservoir running, if still no fluid flow,then take compressed air( ...

...the steam output, please help! Possibly a split pipe or securing clip has come lose but if it is a cheaper unit it will be the pressure tank seal has gone, I have recently fixed one for a

...lose the suction power regardless of what setting I use. Upon several times of standing it back up it seems to engage the suction power correctly is there a button or something that does not always ...

...lose and put the intake in a bucket of water with unit running and it pumped the water at a decent pressure. I think the unit isn't getting enough water from the tank. So, I have ordered a new tank ...

...lose or not closing properly. In turn the machine turns on and off repeatedly, especially when being lugged around. There is a little pressure switch where the bag sits that disables the machine from ...

...pressure sensor which is on the power button assembly. Works like a charm now but I will need to be careful willmy next full bag or if I get a clog as the engine with just keep trying to ****. Much ...

...pressure to open to permit the dirt, etc to moved up thru the opening , through the hose, etc. I thught maybe that somehow tghe flapper door would open when operation began, but no dice. It remains ...