LG WM8000HWA 5.1 Cu. Ft. Mega Capacity TurboWash Front Load Washer wit "washer front load board" Questions

...Front Load Washer My LG washer keeps stopping during spin with the display could this be a bad sensor or belt? The main control board of the machine could be faulty as this controls the spin

...Front Load Washer has no power My washer just shut off and now there is no power to the machine. I checked the recepticle, breaker and they are fine. I tried cleaning the filters and still no power. ...

...Front-Load Washer WM2277HW ce sign I have a LG WM-2277HW Front Load Washer It stopped working with ce showing. What is the problem? CE is an error stating that you have a problem with you board or ...

washer won't start after tripping breaker My wife started a load last night; woke up this morning with a wet load of unwashed clothers (perhaps overfilled, but not terribly) in washer, and no response

...Front Load Washer not working with ce showing LG WM-2277HW Front Load Washer not working with ce showing. What is ce? How do I fix it? CE is an error stating that you have a problem with you board or ...

LG WM2277H Front Load Washer. The machine won't turn on. No codes. No nothing. YOU NEED THE CONTROL BOARD. http://www.searspartsdirect.com/partsdirect/index.action

...washer. Does it Spin? If yes, then it might be Unbalanced Load. Try to Load Small Clothes. If not, or if the Error is Appearing again and Again, Control Board or the Sensor is at Fault. You cannot ...

...been cut by the rats...is LG front load washing machine - panel board wires have been cut by the rats...is there a way to get them connected solder and heat shrink or solder and liquid electrical ...

...FRONT LOAD WASHER/DRYER chimes with blank front panel I have had a LG WD-1290RD FRONT LOAD WASHER/DRYER for just under 3 and went to use it one evening when none of the controls would work, I turned ...

...front load washer keeps stopping and I get an error code LE. I've seen message boards with tons of people having the same issue. Although the troubleshooting guide/manual says it is an overload in ...