Kenmore HE3 Gas Dryer "replace door switch elite" Questions

...door switch is defective. The door switch is located on the door of the dryer. To check the door switch: 1. Unplug the dryer from the wall outlet. 2. Open the door of the dryer. 3. Locate the door ...

...this normal with this brand? Not normal. Check door switch. As a test you can jump it out to see if the dryer works then. if that does not help then , I i would consider replacing the starter

...your connections to door switch.i believe this model has a broke belt switch.open the bottom with the machine unplugged and reach inside and see if the belt is broke.if it is then replace the

...door switch and door latch. Open door, set the dryer to air fluff cycle, and manually depress the door switch. Press start button. If it started - door needs alignment to fix it. If it did not start: ...

NOT SPRINGING BACK OUT. IF IT IS STUCK, TRY WD-40 TO LOOSTEN IT. OTHERWISE, REPLACE THE SWITCH. IF THE DRYER KEEPS RUNNING WHEN YOU "OPEN" THE DOOR, THE DOOR SWITCH IS SHORTED. REPLACE THE DOOR SWITCH

...light always on, wont run drum light wont go off. Dryer wont work. DO I need to replace the door switch? Ohm out the door switch if the light won't go out electronic control thinks the door is

...replace If light stays on when fully closed, door switch needs replacement, easily removed. Short term fix, disconnect the switch and tape the two spades together. Warning! Dryer will run even with ...

...door switch. put a piece of tape or something on the switch and close the door and see if taking the slack out of the switch makes it start. Or, hold the switch in while pushing start. DO NOT put any ...

how do i replace door switch on kenmore 11085088401 how to install door switch the switch is on the front panel. the top needs to be removed and then the front

no click is heard, replace the door switch with this part.If the switch is OK, then the only other problem will be with the thermal fuse located on the rear of the machine. Here is a link to that part