Admiral Gas Dryer AGD4675YQ "amps electric pull" Questions

Ad

...electric dryer to test it lift the top up on your dryer.this will require a wide,flat tool @ front corners.a flat screw driver will work but a stiff putty knife is ideal.lift & pull.the door ...

Ad

Question about Kenmore Dryers

1 Answer

...electric dryer. I turn the knob to the timed position and pull the knob to start, but the knob comes off of the stem. My husband tried pushing and pulling the stem using a pair of pliers, but it ...

Ad

Electric dryers use tremendous amount of energy. Going on fluff your using just the normal 120v and not pulling many amps to run the dryer. However with the unit on high your pulling more amps and are

amps should a whirlpool duet dryer pull while running Take the wattage info off the unit multiply the number by 1000. Now take that figure and divide it by the power source being supplied. Should give

Question about Whirlpool Dryers

1 Answer

Electric code states the maximum ampacity; 12 AWG = 20 Amps 10 AWG = 30 Amps 8 AWG - 80 Amps According to this, an electrician would pull 10/3 (or 8/3) for a dryer service because 12/3 is not allowed

electric dryer trip the breaker when the dryer vent is disconnected from the duct work but not when it is connected? The dryer was taking sometimes 3 cycles to dry heavy loads.The duct work could have

What amperage should my dryer be drawing. My amp probe readings are around 27 amps and some where in the drying cycle (not the begining) it will blow a 30 amp fuse. ?? Is my problem in the heating ...

Question about Dryers

1 Answer

My wall switch, fan pull chains, and metal bed frame all shock me. Could I have an electrical problem or is it just static electricity? I just touched the fan pull chain while the light switch was off

...pull so many amps from the electrical supply. When the amps are oover the amp listed on the breaker the breaker will trip. So if the breaker is a good one then the motor is going bad and increasing ...

electric dryer will not heat,everything else is working Unplug power cord & pull the back off and use ohm meter to to check the heating element also check if the element is ground to the heater ...

Not finding what you are looking for?
Admiral Gas Dryer AGD4675YQ Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top Admiral Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Kardoc

Level 3 Expert

7503 Answers

Are you an Admiral Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...