JBL BP300.1 PowerValve Series Car Audio Amplifier "turn amp" Questions

...amp should turn on when you turn your radio on, not your truck. First try disconnecting the remote turn on that comes from your radio. After that is removed turn your radio on and them run a jumper ...

turn the amp off temporarily. You have probably noticed the speakers make odd noises or sound awful just before the amp turns off. Other issues may be that you have a bad ground connection to the amp.

...light turns off after a min but when u hook up the remote and turn the stereo on the amp doesnt turn on You may have the amp set to turn on via an audio signal. Set the Signal Sensing switch to

...amp. u can turn it on and off at will and it will bypass any problems that your current one may have. just mount the switch in you dash somewhere or in a console if you have one amp green power light ...

...they turn on it safe mode. the fuze could be blown on the amp or the speakers are to much power for the amp at full power so try to turn the amp to half and not to turn the speakers all the way

...turn my stereo on the amp turns on perfectly but then the amp turns off and when i checked the amp it the red light turned on Be sure to have a good ground. If that is not the problem it could be the ...

...turn on My amp gets to hot to touch. Now it won't turn on. When you first turn on the receiver the led lights red then turns off. All connections are good and intact. When I disconnect the speakers ...

amp turns off when i turn my speakers up i turned the volume up all the way to 25 then if i go a lil more my amp clicks and the green light dims???it never used to do that.it a kicker amp 750 mono amp

...problem could be in the turn-on output from your head unit. You can resolve this by using a relay, or by using the ACC output from the ignition (red wire at radio wiring harness) to turn on the

...turn off the amp and then turn the radio back on and the Amp back on and it stills does the same thing. Do you have the switch or activate wire on the new amp. to the right hookup? If you do, then ...