Dyson DC40 Multi-floor Vacuum DC40 "put bottom back" Questions

...put the bottom plate back on, then turn it over, undo the motor and put the belt on the motor pulley, re-install the motor and put the rest back together. To remove the top, thewre are a couple of ...

...the motor shaft and then stretch and start the belt on the brush roll and rotate the brushroll by hand untill the belt is all the way on. put the bottom plate back on and tighten the 5 bottom

put the bottom plate back on, turn it back over and stretch the belt to go around the motor shaft, turn it by hand to make sure it moves freely, then put the top cover and knob back on. Just push down

...through the belt and pull on brush roll to stretch belt far enough to put back in vacuum. Install bottom plate and spin brudpsh roll by hand to insure it isn't restricted before you turn it back

...Remove the plate on the bottom and pull the brush roller out, but belt around motor shaft then around brush roller and put roller back in place, the belt will stretch to fit. Put bottom panel back

...around the double rollers Open the bottom put the belt around the motor spindle and the groove in the roller. Put the roller back in the retainer molded into the housing. Replace the bottom

...bottom of the top cover, on each side there should be 2 slots when you can put a flat blade scredriver, pry up to release the tabs holding the cover on. The know will come off also when you do this, ...

bottom there is a slot on each side of the top cover, using a flat screwdriver, insert blade into the slot and pry up to release the locking tabs. Belt # is 38528040. Put the bell over the brush roll,

...bottom cover.....pull the rotary brush straight down and out....put new belt in the groove on the brush then reinstall brush and put the belt around the metal rod thats inline with the groove on the ...

...back into the dc25, it extends so far that the flap at the bottom opens causing no suction when using it uprightWhat's your problem? When putting the hose back into the dc25, it extends so far ...