JBL BP1200.1 Car Audio Amplifier "pioneer head lighting" Questions

pioneer amp wont come on. no light. prd2000t. remote shared w/another amp. it works fine power light uses a resistor , it may be bad , try to use seperate turn on instead of splitting them close to ...

...pioneer and itook out my amp and box for a few months then put it back in never removing any cables. when i hooked up th amp i got no power from he amp. the power source is good because i get a spark ...

...head unit is an old Pioneer KEH-P1015 with 4 speakers attached to it and a 6 disc pioneer CD changer. Before the problem occured, one of the rear speakers (rear right 6x9 speaker) is not putting out ...

...pioneer GM-X524 amp connected to a TS-W253C subwoofer and it isn't working. It has 12v power to it and a solid ground, but the power light wont come on and the sub isnt working the sub worked when ...

pioneer front spekers to. the problem im having is when the amp turns on i get no sound trough any speakers and the red light flashes. if i disconnect the amp the front speakers work. i checked all my

...Pioneer system when i purchased it. sounds like either a bad earth or a bad remote signal. check the earth cable for continuity - make sure that it has a good earth to the chassis of the car. also ...

where is the power switch, or how do you get the power running through to get blue light to turn on? There is a terminal marked REM it's between the + 12 volt and Ground terminal. The REM terminal ...

...head unit is a pioneer 42000 dvd double din. every thing is wired right, and its all only about two months old. it worked fine when i installed it and now its doing this. help me with this problem. ...

...pioneer 12 inch sub is brand new, i dont think that is the issue. I believe it is with my amp, which is a few years old but has worked fine on subs in the past. ( my last sub blew, so that is why i ...

...Pioneer GM X862 car amp, with a constant red light on it. Also, it is supplying the subs with power, they are lightly vibrating but its not pushing like it should. No bass. Make sure your power line ...