JBL GT412 Car Subwoofer "vibe sub" Questions

...vibe cbr10 subwoofer with built in amp i believe i have wired it up properly, but there is still no sign of power as the light does not come on at all i dont know whether it is that the actual sub ...

vibe cbr15 black air 15" evo, ive had my sub for about a year, it has been a great sub and i have had no problems with it until today, when the 25 amp fuse blew, i then replaced it and it burnt out my

How to wire a single 4 ohm sub to a lanzar vibe 220 amp Simply connect the sub to the connections marked bridged on the amplifier, It will be the + on one speaker output and the - on the other.

...sub in a enclosure dont seem to be giving bass they are wired fine and run by a vibe amp which is powerful enough. i have a second amp to power the 6x9s, the second amp is running a power cable from ...

...vibe 4 inch ohm 1600 sub woofer has two voice coils and i want to know how to put my speaker wires in to it to get the bass out http://www.rockfordfosgate.com/rftech/woofer_wizard.asp take a look ...

My CBR 12 cuts out after about 10mins, switch power off then back on then its fine again for 10 mins or so... Is this an overload protection or a fault? the sub is probably drawing to much, check the ...

i have 2 15inch lanzar vibe subs (vw15d) and i didnt get any deminsions to make a dual box for them these are the specs of the speakers: Overall Diameter: 15.8" Mounting Diameter: 14.6" Mounting Depth

I have a lanzar vibe pro VBP251 2200 watts and two 12" kicker comp subs. What do I set the amp on You need to figure out what ohm capacity is of the amp and the speakers. It then comes down to wiring.

...sub and i am running it with a vibe a7 slick 1300 watt amp and doesnt sound well ,.what is the problem?is it the amp>?.and can you tell me as well which enclosure box is the best for this ...

...vibe cbr 10 5 months ago and now when its playing it keeps chiping in and out any suggestions as to why thats happening check the wiring of your power amp that driver your sub woofer, use #4 wire for ...