Question about Lightware Office Equipment & Supplies
Scout lightware projector. I have lost the original fuse. What amp fuse goes in this projector? The projector takes a 5 amp fuse. The manufacturer gave me the information.
Question about Optoma Office Equipment & Supplies
...blews then you have to replace the power supply board. Because the components in a projector power supply is rearly available. You will not be able to access the fuse with out oppening the ...
...fuse on the power board inside the projector itself, But normally the fuse does not go bad unless their is a dead short in the unit. I think you have to Reset the lamp every 800hrs or 1900hrs I think ...
...Projector Fuse Hello Sir.... I am having trouble were the fuse is inside my EP716 Optoma Projector or what it looks like... If you could help me that would be great... thank you very much... There is ...
the projector won't turn on. Everything is plugged in but the fan wont turn on. is it the fuse? if so, where is it? There is no fuse. Sounds like a power supply issue. How old is the projector?
Question about BenQ Office Equipment & Supplies
...fuse has burned out in my projector benq MP610. So I opened the projector to replace it : same result. I verified, the lamp is also burned out. Do you think the burned out lamp can make the fuse to ...
...the same u have to open the projector. fist check the input fuse. if fond faulty, do not insert a new one immediately. check is there is any component fault in the smps. only after insert the fuse. ...
Question about InFocus Office Equipment & Supplies
...fuse on projector? Projector no power remove the top, front and rear panels (4 copper screws and 4 silver screws on bottom, 2 silver on back). there are 2 fuses for the power supply. the left board ...
FUSE INSIDE PROJECTOR IT SEEMS OK. THANKS FOR REPLY Hi TheMull I also checked and the fuse looked fine , but I thought to myself why not take a chance and replace the fuse as this is a very cheap part
Question about Sony Office Equipment & Supplies
...projector will not power on. Checked power cord, there is a current; even change cords and outlets. You say checked cord and power there, might be from leakage, check fuse, check units fuse, but if ...
22 questions posted
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions