Microsoft Xbox 360 Halo 3 Special Edition Console "controller wont stop" Questions

...Wont turn on with new batteries in it and battery pack from my other controller It's defective, definitely. Either take the receipt and return for exchange or money back or if it's too old, sell on ...

wont sync when using the rechargable battery packs instead of the 2 AA cell batteries provided with the controllers. Have tried hitting the sync buttons on both the console and controller, green light

...controller wont connect to my xbox 360 I have tried every solution i have found and nothing works. I recently connected with an HDMI cable and thought that mite be the problem. When i try to connect ...

...wont connect and there is no green light on the console i assume you mean wirelss controllers, if so, on the front of the console there is a round connect button marked '>>',( to the right of the ...

...wont stop spinning round Hi, This is quite a common problem and the actual hardware error is NOT normally a faulty drive! It is caused by the sensors on the back of the drive overheating and if you ...

...wont open 3 red lights on the Xbox 360 is the most common error and it means "General Hardware failure. To fix this you need to stop the amount of heat that the GPU and the CPU is taking. To do this ...

...controller wont turn on or light up i was playing on the old xbox yesterday and i saw that the batteries were low. i thought i would try get the most out of them, but it kept shutting off. then one ...

...wont conect to my controller ?? If your Xbox 360 will not play your games this is because of the sensors on the back of the drive overheating it is not normally the laser. Luckily you can fix this ...

wont do it if u say no it freezes Check to see if your xbox 360 is connected to the internet. If your xbox is connected to the internet and still is not allowing you to update check your xbox setting.

wont connect. It isn't making the noise when it turns on either. I un-plugged and plugged back in the Video and Audio Components and it still didnt work. I un-plugged the consel and plugged it back in