Question about Kenmore Ovens
...stove (or turn off the circuit breaker) again. Look at the broiler and bake elements with a flashlight. If it has any damage (breaks, char, melting), you will need to replace the element. Check where ...
...element is bulged or damaged. If not, use a multitester to see if one of them is not conducting. Replace it. High limit should conduct fully. Use the curcuit diagram on the stove to determine its ...
the grill is nt working there is no heat source to the grill. Is there an internal fuse that may have blown? Highly unlikely, either element gone or selector switch faulty, you need to test element ...
...element is burnt out. Get a volt meter.unplug the stove.take off the back,disconnet one of the wires connected to the element and test it. It should read aproximately 11 ohms if good. if a high or no ...
...element is burnt out. Get a volt meter. Unplug the stove. take off the back, disconnect one of the wires connected to the element and test it. It should read approximately 11 ohms if good. If a high ...
Question about Ovens
...stove? You may want to get someone to come in and check it out, as it puts out some very high current. Stoves run on 220--240 volts, and the oven jacks up the Amps, which is a hazard if you make ...
...to work. Stove top works but oven doesn't. What can I do to fix this? Pyrolitic mode heats up quite hot. Might have tripped the high temp cutout. Does the oven fan work? if so >> check ...
...element plugs in to. You may find the only thing wrong is a bad wire. Know also that wire connectors for high heat things like stoves are sometimes made stainless steel, for the high heat. God bless ...
Stove-Oven/18---/Oven-won-t-turn-on- Oven Won Turn on the broil element is the heating element that is found at the top of the oven and produces a very high heat for broiling. If the broil element isn
32 questions posted
Usually answered in minutes!
343 Questions
26 Questions
32 Questions
13 Questions
8 Questions