Breadman TR2200C Ultimate Bread Maker "turning machine" Questions

...machine and go to a kneading cycle. Look through the lid window to see if the motor shaft is turning. If it is not turning, then a belt fell off , needs to be tightened, or has broken. Motor, belts ...

The machine gets warm but the paddle doesn't turn. Put in a mix and set the time. Machine didn't 'make' bread. Got warm during warm-up period. The part at the bottom of the machine moves as usual but ...

I have a brand new West Bend "just for dinner" bread maker. In the bottom, the two-pronged part which the motor is supposed to turn, doesn't turn. Thus, the kneading spatula doesn't turn. The heating ...

NY Breadman Ultimate TR2200C stopped working. The "gear shaft" on the bottom of the machine no longer turns. Any suggestions? Hi, Take the pan and paddle out of the machine and see if you ...

...turning? What should the base of the liner look like with respect to the clips that turn within the machine? That sounds like a serious problem. Recommend you replace your pan assembly and paddles. ...

...machine to dough and pressed start, the blade is not turning. Dumped everything out to make sure everything was securely attached and it was, reset to dough and started with same problem. What have I ...

can't remove pan from a west bend bread machine model # 41063 Received this machine without manul and I can't remove the pan. I have had experience with other machine and the pan just lifts out. I've ...

...machine and start a kneading cycle. Look through the lid window and see if the motor shafts are turning. If no...then the belts fell off or are loose. If everything is fine then maybe it's the ...

Would like to know how to set machine to start at a later time Since you haven't listed the model or make of the bread machine, there is a simple solution for this problem that will work or any make ...

my breadmaker have two paddles,one seem like it doesnt have the power to turn porbable.what is wrong,i want to fit it myself. Hi, This could be caused by 3 reasons. 1) The bearing on the paddle shaft ...