Question about KEF Audio Audio Players & Recorders
...test. Using a 9v dc battery on ac speakers and crossovers could cause damage also unless it is a very high wattage speaker, which most are not. Speaker signals in home and car speakers are usually in ...
...using a multimeter(on ohms setting) it should give you a reading from 8 to 4 ohms. Sometimes they may give readings as low as 1 ohm. When testing the speaker/sub you should hear a soft scratchy, ...
Question about Behringer Audio Players & Recorders
...multimeter to test the voice coil right at the horn`s terminals then with the crossover network connected you would go down the line all to the speaker box terminals to check for an open line. But if ...
...multimeter or use a 1.5 volt AA cell for testing the speakers. You can connect the speaker cabinet line to the battery and ccheck for voltage at the tweeter branch. Othere check the nettwrok and ...
Question about ElectroVoice Audio Players & Recorders
...Speakers. One of my Cabs the 15" driver stopped working... I can plug the Horn and the 15" Driver in Separately and they both work which I think means I have a problem with the Crossover.. I just ...
Question about Onkyo Audio Players & Recorders
multimeter you can test it looking to see if it is getting power. Allways suspect any part that is on a heatsink. Before removing any suspect you can put the part numbers into Google to see if you can
...test it with an ohm meter or a continuity check - it'll show an infinite resistance or "out of scale" voltage drop if the wire is interrupted. if any crossover parts need to be replaced, you should ...
...multimeter to test the speaker wires. You shouldn't have more than a few millivolts (AC) at output. The humming is at approx. 30 volts AC - the power supply voltage. The amplifer has broken down and ...
...test the speakers to see if they are working. How do I do a simple test to the speakers to find out if they are working and where they are located? 1st of all i would take a multimeter and test each ...
...for home use. A plain-jane digital multimeter can cost <$20 US and would be useful for many other tests around your home and car as
2 questions posted
Usually answered in minutes!
151 Questions
87 Questions
76 Questions
51 Questions
54 Questions