Mackie SRM-450 System "attach magnet speaker" Questions

magnet, the speaker part is attached to a cone that slides over the magnet, They tend to make crackling noises. Try very gently to apply pressure to the horn and then release. If you hear a scratching

speaker has a centered magnet in an assembly that extends the field of the magnet around a coil of wire on a form called the 'voice coil' that is firmly attached to the cone which moves in and out to

buzzing sound when sub is on even without turning my amp on, if you can call me on my phone 909 938 9219 it be better for me thanks, i am little slow with my computer, please help Buzzing is usally AC

...front diameter of the tweeter. When the speaker magnet grabs the little metal plate, adjust the plate until the buzzing stops. This means of course that you have to turn the power to the speaker

making loud humming noise only.but if you plug making loud humming noise only.but if you plug the rca plug into the output it does work some If I understand this correctly: with NO input or cable ...

When I plug it up it makes a loud buzzing humming sound that's unconteollable with the volume. Buzzing is usally AC line noise leaking into an un-shielded cable somewhere or a floating ground. If the ...

i have bought an optical fibre cable to connect from my jamo a305 to my new sony nx810 tv and im getting a buzzing sound, there are 2 optical fibre outputs on the back of the amp, which one do i ...

magnet), you will notice that each terminal has a copper braid wire going from that terminal to the speaker cone. Inspect both braid wires carefully at each end (near the speaker terminal and near the

...magnet. If not, you can assume they should measure 8 ohms. If they measure open circuit (high resistance), then they have failed. A good speaker repair guy can often fix an open circuit tweeter as ...