negative terminal. If not the case here, look closely where the leads route to the mid and tweeter. The terminal that leads to a cross-over component (capacitor) is the possitive terminal. (old school
...negative and possitive still connected to the battery and a ground and power touch on the radio harness, is my radio shorted out forever or is it just a fuse that blows? It is Finished Unless you had ...
...says which is whick,my truck book doesnt,thanks radio install shops sell a wiring harness that utilizes stock radio plug in.these wiring harness,are labeled possitive an negative,thanks ken ...
...to the two seperate channels, and then hook the other one to the negative on one channel and the possitive on the other. if this wasnt what you meant, just, try to tell me more about the amp... ...
...possitive..." then hook it up regularly like you would do any other time." and place one set of the speaker wire coming out of the stereo and hook up each to corasponding negative and one positive,, ...
possitive and one negative for two subs how do I make this work Your subs are set to connect as one channel... One Speaker, even though as a SET. You can either hook them up as is. meaning to the rear
possitive on your amp or box you are installing in. Run the possitives of both voice coils to this. (yes, you will need two lengths of speaker wire) 2. Identify the negative on your amp or box you are
86 questions posted
Usually answered in minutes!
196 Questions
131 Questions
67 Questions
48 Questions
46 Questions