...are two ohm then connect them directly right and left. But if they are 4 ohm connect them parrallel (positive to postive, negative to negative and bridge the amp.) Good Luck, please
...but im going to buy a new one because that amp is burnt up. are two 4 ohm sony xplod, wired in parrallel creating them to be 2 ohm subs a peice, stable to the point where they will not blow up? ...
...2omn speakers and i just need to know best way to wire them for a mono block amp. i have them wired parrallel in the box With 2 speakers wired in parallel, the impedance will be halved, so you are ...
...have been. Its getting power, connections are good, connected to two dual 4ohm l7 kickers ran parrallel. Fuses are good, has a gell cell 800 kinetic battery. Jensen head unit. I think thats it
For 2 ohm (which it seems like you want, so you can get the most out of your amp), you wire them in parrallel. Connect the (+) of VC1 and the (+) of VC2 to the (+) of your amp (I am assuming this is a
...peak, and I have a 1000watt JL audio 2 channell amp, they are both stable at 1 ohm. I wired them parrallel, and it blew it. That amp should have never blown that sub. Opions? Im buying another
...pwe 254 10 duel voice coil subs. i would like to know how to wire this set up for the most power. parrallel the voice coils then run them in series to the amp(mono)? The Soundstream Class A 5.0
...you'll get the added benifit of actual usable output. Taking most amps into a higher impedance (in parrallel it would be 12 ohms) you might over stress the amp (trying to get reasonable volume from ...
...negative of that voice coil to the negative of the amp. Second is a 2 ohm load. This is called a parrallel set up. Go from the positive of the amp to the positive of both voice coils. Then go from ...
86 questions posted
Usually answered in minutes!
196 Questions
131 Questions
67 Questions
48 Questions
46 Questions