Question about Ingersoll Rand Tools & Hardware - Others
ir 231G 1/2 impact runs w/o trigger pressed Mine does the same after trying to break some over tightened lug nuts. Did you ever get a solution?
Question about 1A Auto Parts Tools & Hardware - Others
1990 pontiac security light blinking car wont start Lock and unlock the drivers door with the key. That should get it.
Question about 1A Auto Parts Tools & Hardware - Others
pistion replacement didnt mark pistons before tearing down engine block for 98 gm 3.8 v6 will it matter what cylinder they go back into Nope...as long as you put them back on the rods the right way
Question about 1A Auto Parts Tools & Hardware - Others
my truck will start and ideal but it wont take gas whats wrong? Lots of things. Computer problems, fuel pressure regulator, mass air flow meter. Look at all these places and you'll find it
Dome light will not switch off. How do I repair? This sounds like the switch on the door is stuck or needs to be replaced.
what does Code 12 mean? Service engine soon, then any other codes will follow !
Question about 1A Auto Parts Tools & Hardware - Others
how do you know if the chip in your ignition key is any good. It won't turn the lock if it's bad or the wrong key in in the lock.
Question about 1A Auto Parts Tools & Hardware - Others
engine runs rough at idel and smooths out a little bit as rpms are raised what could be causing this Loose timing chain will do it.
smokes when I start it up it smokesthen it coutinues Worn rings and /or worn valve stem seals
car wont start the engine can't start the car engine fuel pump of filter
2 questions posted
Usually answered in minutes!