Dell E228WFP LCD Monitor "turn safety mode" Questions

...turn it on it doesn't go on and all I see is a blinking blue light. If monitor was working 2 days prior, it should still be working, unless the "switch mode power-supply" has detected a "fault ...

...safety shutdown mode. Try it with another PC first. If it still does not work then you will need to troubelshoot it. Read my guides and see the picturesd of failed VIEWSONIC and all other brands ...

...mode. Have had no previous problems with the Monitor. Try it with another PC first since it may be not getting the video signal from the PC Video card. Also check the video cable. If you are going to ...

...mode and i cant get out of it. Tr it with other PC first to make sure it is not video card problem. If it is monitor problem, then you should read my guides to see if you will want to DIY repair. If ...

...mode. this monitor was working perfectly fine a week ago when my parents had it hooked up to their computer. Any ideas? On rereading that post, I note that it shut itself off; perhaps it is time to ...

...turn on computer, power saving mode comes up, computer cannot work while this is on Does it do the same when attached to another PC? More likely to have bad caps as shown in my pictures here: ...

...safety circuit kicks in, because it involves with high voltages. Thirdly it may be the backlight itself, which is like most compact CCFL energy saving lamps that flickers or turn itself off when it ...

...mode, the monitor rarely turns on. The on/off button does not work either. I have to unplug and replug in the monitor. Any suggestions? More likely to have dying power suppkly due to bad caps, look ...

...turn it on it turns on, show desktop and goes in standby mode. It may have bad DC filter caps in the power supply. http://s807.photobucket.com/albums/yy352/budm/AOC%20LM729/ If you are going to DIY ...

...safety devise that is built in to your unit and many others. It gives your screen longer life. GOOD LUCK. To disable the SLEEP MODE on your monitor, try adjusting the POWER SETTINGS in your ...