Dynasty DGRSC 30 Gas Kitchen Range "common elements stove time" Questions

likely in the high limit fuse. It is the common component to both oven elements. The control could be bad, but I would have someone test the high limit first. It should read 0 resistance if it is good

...elements can be pulled out of their socket and checked with an Ohm meter for continuity. If the surface element won't work, check to see if there is any visible damage to the coils. Also, check to be ...

elements are 115/130 VAC. Stoves use 220/240 so that you can use both the burners and Oven at the same time. Since the burners are Gas, then 220/240 VAC isn't needed. (Note: 220 is simply dual 110 hot

...stove was here when I moved in. Any suggestions?? thanks Hi, This is most common with electric ovens and the bottom element goning bad...but I will also include the most common problem for gas ovens ...

...elements on at 1 time. like Baking. First the most common thing:A COMMON TIE POINT; A main wire burned off will cause both elements to not heat at the same time. It could be at the back going to one ...

...common to both the elements,to do that ya would need to remove the back panel and check for that broke wire,their is a wire that comes froms the cord connection block and goes to both the ...

common connections to both the broiler and oven elements are: 1. Line 2 (L2 on the diagram) of the incoming 230 volt power. 2. Thermal switch supplying Line 1 (L1 on the diagram) to the ERC 3. The ERC

...stove top works fine and there are no error messages Usually when both elements are not working and everything else is working fine, the problem is your OCU (oven control unit), commonly known to ...

common denominator? HI, If neither the bake nor the broiler heating elements heat, but the range burners still work, the clock may be set for a timed or self-cleaning cycle. Check to be sure the clock

stove top works fine), basically looking for another common denominator. Any thoughts, suggestions, ideas -- Would be fabulous!! Something to do with intermittent low gas pressure? Not enough pressure