Jl Audio E2150 Car Audio Amplifier "boss protect mode" Questions

protect mode when a fault condition is detected. These include insufficien voltage, excessive load, shorts and contact, overheating. In your case the problem is usually excessive power draw. A contact

...protect mode Everytime I turn my music up the amp cuts off The first thing I would check is how your speakers are wired to the amp. Multiple speakers wired in series or parallel will change the ...

...BOSS isn't in "Protected" mode (Red led lit) and connect the speakers properly (check the connections if they are in "bridged" mode). Also, make sure you set the cross-over, bass boost setting, bass ...

...protect mode and probably has shorted output transistors. To eliminate other possible causes, read through the following page: Amp in Protect Mode - Trubleshooting Let me know if you have any other ...

...boss ava 400tr amp. Amp is swapping over to protection mode. Could it be a ground? PLEASE HELP :) Disconnect all the wires and make sure that their all connected to the right terminals. If not ...

boss 4800 watts its stuck in protect mode but the green light will continuously flash , and when i wire my sub (rockford fosgate t2 15 inch) un it generates a high shrieking sound idk what the problem

...Boss 3500 watt monoblock amp that works when the car is turned off but as soon as I start the car it stops putting out any sound. The amp is wired up to a 10 Farad capacitor that is wired up directly ...

...boss amp for 3 years and worked fine, with the new sony amp it worked for a week and now when I turn on the radio, I hear a pop sound and the amp goes in protection mode, I tried moving the ground ...

Protect mode on. All wiring is operative without incident. Power and all is working, but will not come out of protect mode and all fuses are brand new. it could be one (or more) of several issues. ...