Question about Performance Teknique Car Audio & Video
i got a performance teknique power amp its 1700 rms at 1 ohm i need 1500 rms at a load of .67 will be ok No, with 1700watts at 1 ohm the max current is 41 amperes, with 1500 at 0.67 the currents is ...
my dual amplifier has the red light on and my speaker are not playing one of two things dead shorted speaker in other words blown speaker, or you have an internal problem with the amp due to ...
Question about Phoenix Gold Car Audio & Video
well if i crank it up for a little too long it just shuts itself off for a 5-10 min, and than comes back on sounds like the unit is going into thermal protection. make sure its in a vented area. may ...
my xploid amp blows the fuses in the amp if my subs hit to hard and i dont know why? It sounds like you have the levels improperly matched or the wiring to the sub woofers making an improper impedance
How to connect a 2 ohm stable in stereo I have a 4 channel amplifier and I want to hookup a 2 ohms load. How to connect a 2 ohm stable in stereo ok when getting into wiring and impeadances on car ...
mid level volume my sub starts poppin i jus hooked up my jl 1000/1 2 a 13w7 and when i start 2 turn up the volume i get poppin sounds in the sub,what the hell is wrong? Set your gains correctly. You ...
ix 702 when i turn it up it kicks out and in not much either to get it too do it like its in protect mode You probably have either a short in the speaker wiring, even a small bit of wire to a painted ...
fuse melts when turned up all the way speakers are overdriving the amplifier you need a higher wattage.
215 questions posted
Usually answered in minutes!
131 Questions
85 Questions
67 Questions
48 Questions
46 Questions