Kicker KX1200.1 Car Audio Amplifier "sony amp xm 100" Questions

...sony explode xm 1002 hx amplifier. I am trying to power 2 10" subs with it. Is this amp 2 ohm stable if a bridge it? i want to be able to run the subs at 140 watts rather than 100 but i'd ...

amp Sure is. The sony is bridgable as follows: 100W x 4 @ 4 Ohm 100W x 2 + 250W x 1 @ at 4 Ohm This will allow 2 channels to run 100 watts each @ 4ohms with an additional single channel with 250 watts

...XM-1002HX is a two-channel amplifier with power ratings of 100 watts x 2 or 280 watts x 1 into 4 ohms and 140 watts x 2 into 2 ohms. ... Output Power at 14.4V (20Hz ∼ 20kHz): .High Current ...

...sony xplod 800 watt amp what are the 2 fuzes in the back for? The fuses should be 30Amps each and they are there as a protection system in case of a power surge. They will blow before damaging your ...

...sony 100 watt amp and it wont stay on for very long i turn the amp on and try to adjust it and it goes to protect mode as soon as the bass starts to hit i have it hooked up straight to the battery no ...

100% on this though but you may get around it by bridging your speakers by connecting both speakers to the amp as normal but swapping the speakers negatives around! That may cause the amp to run as if

...sony amp to sony sub through my stock radio. when i first turn on the radio the protection light goes on and nothing. if i shut the radio off and then turn it on again the amp and everything works ...

...amp like the Alpine MRP-M500 will deliver 250 watts to each sub at 2 ohms. And it only costs $179. Currently, the MRP-M500 is out of stock at Crutchfield. I just bought the last one. So my 2nd ...

...sony xplod 500w amp isnt working... i have everything connected but it still isnt wotking REMOVE THE RCA INPUTS AND DISCONNECT THE SPEAKERS, THEN POWER THE AMPLIFIER UP WITH THIS NO INPUT, NO SPEAKER ...

...sony xplods will they run off a 1000 watt amp yes it will work, but it will only put out the power to the sub that the amp allows, ie : 100 watt amp puts out 100 wats. you can also try reconfigering ...