Dell Inspiron 530s Desktop Computer (ddcwfa2_5) IntelPentium dual-core processor E2160 (1MB L2,1.80G "bios boot" Questions

...boot settings. Anyway In Bios there is a little summary of each changeable feature within it. Once you make your selection(s) make sure to save changes so you do not have to keep resetting them to ...

...BIOS by pressing F2 at boot up and set boot sequence to 1. CD drive and 2. HDD) or the HDD is corrupt. In that case it should have made some attempt at booting. Or it should have at least told you ...

...Boot to BIOS (F2 at boot) ensure the drive is seen there. If it is then boot to Windows and run this fixit utility http://support.microsoft.com/kb/314060 If it is not seen in BIOS, then check cable ...

...boot device Go into your BIOS by pressing F2 and see if the hard drive is being recognized in there. If it is then reset defaults in the BIOS and reboot and see if the computer will boot back into ...

...boot option in the bios from HDD to CD. When the boot screen comes up, look at the bottom of the screen, it'll say something akin to Select "DEL" for SETUP or F2 for boot options, you can use either, ...

dell inspiron 530 cmos checksum This error usually occurs when the CMOS/BIOS battery is flat.Replace the BIOS battery and then boot up and go into the BIOS setting to setup the Date & Time etc.

...boot past bios screen, blinking cursor in top left corner. with nothing hooked up, says no boot devices available. i have tried each one solo, made sure floppy was disabled, cdrom set to boot first. ...

...bios settings, you choose boot order setup and setup first priority to cd/dvd and press F10 by saving the changes and then press any key when you see the prompt so that it can boot up to windows xp ...

boot" then turn it back off and move the jumper back this will set the bios at "factory defualts". the only way to disgnose this is by doing that. if then it does not boot you going to need to replace

...0 seek failure on it. pressf1 to continue, f2 to enter setup diskette drive o or disk drive o? f2 to enter bios check boot options to boot on drive o [hdd-0], most boot options go floppy,cd-rom, ...