Utilitech 3/4-HP 15 GPM Shallow Well Jet Pump 3/4-JET "keep primed pump" Questions

Ad

pump works great when primed, great water pressure. In addition, the pump will not lose its prime between zones and can work all night. Its once I shut off the pump and leave it off for about 4 hours,

Ad

Question about Plumbing

1 Answer

...pump. This should keep the water from leavin the pump. if you still need to prime then there is a leak on the incoming line from the ground to the pump and you will need to have a well company come ...

Ad

...pump will squirt water and then stop . I keep feeding it water slowly but it won;t prime. What should I be doing? Check for an air leak in your siphon line. It can be very small and totally prevent ...

Question about Flotec Plumbing

3 Answers

...pump. Keep adding water until the pump and all of the piping to the well is full of water. If a priming plug or tee was also added on the suction side of the pump, open that section and fill all of ...

Question about Plumbing

1 Answer

...keep the pump primed is to feed a small amount of pressurized water into the pump all night, you can do this by the addition of a connection to where the pressure gauge connects to the pump. Please ...

...keep trying to prime over & over. Any tips on the best way to prime a gravity fed system??? I don't think the power shortage had anything to do with the pump, I think it is the impeller or a ...

Question about Plumbing

1 Answer

...The sump pump is beeping and wont stop. It sounds like a smoke detector. Any advice on why it keeps beeping probably letting you know that if has run out of water to pump and need

Question about Flotec Plumbing

1 Answer

...pump is keeping its prime and will keep its pressure but when we use enough water for the pump to kick in it does not have enough suction to draw the water in a build the pressure back up so it just ...

wont prime.just moved in house and pump goes to lake.turn it on and it runs but no water.do i have to prime yes fill it with water from top plug and turn it on and keep adding water til it picks up

Question about Little Giant Plumbing

1 Answer

...a new magnetic impellor assembly as well. Make shure you prime the pump before you turn the pump on If you keep loosing the prime the pump is sucking air from around seals or a jount on the down ...

Not finding what you are looking for?
Utilitech 3/4-HP 15 GPM Shallow Well Jet Pump 3/4-JET Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Utilitech Plumbing Experts

 Mikey
Mikey

Level 3 Expert

6904 Answers

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Utilitech Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...