...wire or metal parts on the vehicle. 2) Remove the nonworking sub from the enclosure and check the wiring from sub to terminal inside. While you have the sub out, check the "braided" wires going from ...
...WIRE 2 OHM SUBS INTO A DIRECTED 1500D MONO BLOCK AMP im assuming you have 2 subs that are DVC? if thats the case, wire from the positive on the amp to the positive voice coil 1 on sub 1 to the ...
...2 to the right terminal. BUT if your subs are 8ohm then wire it with all positives from both subs to LEFT positive and wire all negitive wires to RIGHT negitive... and see if that helps and good
Question about Hifonics Car Audio & Video
...now the subs should be wired together at a 2ohm load. run the two positive wires into another combined wire which will run to the positive speaker terminal on the amp. do the same for the ...
wire the subs to the amp. OHM LOADS, SUB WIRING, OHM RELATED POWER OUTPUT SERIES SUBWOOFER WIRING Wire the positive pole from one voice coil (using wire that is as thick or thicker than your wire from
Question about Planet Audio Car Audio & Video
...wire these subs. (Pair). I have heard of several ways. I have a 4 channel amp the soundstream picasso 4.760. Bridged it produces the most power. I was told that these speakers can not be wired at 4 ...
...subs are...ie...what ohms and voice coils the are (dual 2 ohm, 4 ohm, etc. After that, place the black/negative wire/lead coming from the DMM tol the negative terminal of the sub. The ...
Question about Orion Car Audio & Video
i have a orion xtr 2150 and a hcca 10.4 what is the best way to wire this combo? it gets really hot i put fans on the amp Hello. Quick answer...bad sub and amp combo due to fact that your sub ...
Question about Kicker Car Audio & Video
wire running to the other? is it slowly blowing? I dont know whats wrong? Sounds like the sub is blown. Swap the two subs and see if the sound comes from the other sub in the original location as well
...wire two alpine SWR 1222D subs to a alpine PDX 1000 1 First off excellent choice on audio equipment, i guarantee you won't be disappointed. So your subs are dual coil 2 ohms. So wire each individual ...
5 questions posted
Usually answered in minutes!
174 Questions
102 Questions
72 Questions
42 Questions
48 Questions