HP Photosmart C8180 InkJet Printer "unable cancel print" Questions

unable to print because there's a document in the queue that could not be deleted or cancelled Unplug the USB cable , than delete the printer icon, then restart the computer, once the computer is ...

...Unable to Copy, receive faxes, or print. Refer to printer documentation. Error.0xc18a0106 Turn power off,then on again. The above error has appeared on my HP Photosmart C7180 Printer, I have removed ...

...unable to print anything else. Any ideas of what to do? Thank you! Open the print Queue, click the print job that is hanging and then from the menu, I believe under file, click pause. Once it is ...

...unable to print. I tried turning printer off then on as suggested but no luck. Shut down your printer by pressing Simultaneously Cancel + OK + Black + Color. If I could be of further assistance, let ...

...Unable to print. Error 0xc05d1281...check...any help would be appreciated. Reset the system by holding down the OK, Cancel, Black, and Color buttons at the same time and turn the 3310 off. You should ...

...unable to perform the operation" The printer could be backed up. Make sure all of your cables are plugged in snugly. Go into Control Panel, Printers and Other Hardware and select your printer. Cancel ...

...unable to print I tried to find what the error was and got the message Oxc18a0401. I have tried making sure all the cartridges were correctly inserted. Then followed the instructions *# and 1 2 3 and ...

...CANCEL button to stop a print job. I am now UNABLE to print because it is looking for a media card. When i put one in, it begins to print the pics from the card. I have powered it off and unplugged, ...

...unable mto print. Error 0xc18a0201 Try the following tricks: Press and hold the “left arrow” key. Press the “Setup” key and release both keys. Display should say “Enter Special Key Combo” Press and ...

...unable to print anything Are you checked working condition of scanner before replacing the cartridges?. If scanner is not working align process could not completed..cancel the align process then you ...