Kodak EASYSHARE G610 Thermal Printer "remove cartridge" Questions

remove the black cartridge. It is best to power up the printer before removing an ink cartridge. If that is not possible, then push the power button to release any stored electricity and then grab the

remove the ink cartridge from my easy share photo printer See page 3, under "Getting Started" to chane/remove the ink cartridge: http://www.kodak.com/global/plugins/acrobat/en/service/manuals/urg00384

...cartridge. Clean the contact points on the cartridges with a dry, lint-free cloth. 1. Open the top cover of the printer. 2. Remove the print cartridges. 3. Clean the copper-colored contact points on ...

...remove the color cartridge. 6.Install the color cartridge, and verify that it is fully engaged. 7.Close the color cartridge door. 8.Connect the power cable to the printer. 9.Wait for the printer to ...

...remove the color cartridge. 6.Install the color cartridge, and verify that it is fully engaged. 7.Close the color cartridge door. 8.Connect the power cable to the printer. Wait for the printer to ...

it until it clicks into position. 2. Remove the black ink cartridge, then check the two electrical contacts on the cartridge again for small marks. Repeat if necessary. 3. Re-install the ink cartridge

Remove the new ink cartridge from its bag. IMPORTANT:To prevent the printhead from drying out, insert the ink cartridge into the printhead immediately. 6) Remove the protective cap from the cartridge.

...remove the cartridges and then the printhead (Upon removing the cartridges look into the slot where the black cartridge fitted into. On the vertical wall at the back you will see two small contact ...

...remove cartridge color cartridge will not release. Hi Cort,Is there any paper error on the printer?Is the paper light on?If so,please clear the paper error before attempting to remove the color ...

...cartridge. Remove and discard the orange cap. Insert the color ink cartridge into the printhead Press down firmly on the cartridge until you hear it snap into position Close the printer access door. ...