Kicker Solo-Baric L5 Car Subwoofer "bridge three subwoofers" Questions

...power, attempting to bridge all three subs together will cause the amp to over heat and possibly blow. email me the specs of the amp and subs and i will give you the best advise ...

...three 12" Kicker 01C8VR4...I bridged them but I don't think its right because they not hitting hard at all. It was my first time hooking up subs. Can you help? First check your gain it may be turned ...

...Bridge your amps output. Amp+ to Sub1+Sub1- to sub2+Sub2- to Amp - actually the input wires from stereo may be crossed or one may be faulty. i kn ow because i had same problem about three weeks ...

GOT 3 MTX THUNDER6000 10 IN SPEAKERS IN A NON PORTED BOX GOIN TO AN ORIONXTREM900 AMP WHATS THE BEST WAY TO RUN IT run all three positive to negative and bridge them at the amp

MY AMPPLIFIER KEEPS BLOWING THE FUSES WHEN IT REACHES HIGH VOL. i HAVE IT BRIDGED WITH THREE 10" SPEAKERS. LOOK THE SPEAKER AND IMPEDANCE WILL SAME TO OUTPUT OF AMPLIFIER OR LOOK FOR THE OTHER ...

...three notches. I have turned the gain and eq all the way down on the amp and my head unit and it still cuts out at the sme time. I purchased the subs as a loaded setup so i do not know what the ohm ...

...to give it half of what it wants, I would suggest upgrading the amp or at least buying another one so that you can bridge the wattage and redistribute to all three subs with the correct

best wiring method i have 3 10" MTX thunder 5000s in one box. As is the box is wired with the power coming to the center speaker then each of the outer speakers have "jumper" wire connecting them to ...

three 12 in w3v2 i am trying to figure out how to wire 3 jl audio w3v2 sub woofers together at once any one help me? It depends on how much power/watts and ohms your amp is stable at if it stable at a

...three months, they were probably undamaged, but after pushing them too much, they probably have broken wires, and can't get enough power to the subs when turned up, i suggest getting thicker wires ...