Kicker 05C104 Car Subwoofer "left right mono" Questions

Ad

Question about AudioBahn Car Audio & Video

1 Answer

need to wire to mono block amp never wired a 4 voice coil to a mono block 4 ohm voice coil? on the mono amp it should be from left to right ++ -- you want to go + x x -

Ad

Question about JBL Car Audio & Video

2 Answers

...Right Negative Yellow = Left Positive Black/ Yellow = Left Negative Blue = 1+1 Bridging of SX or HCCA Amps: 1. Use the Orange wire for Positive. 2 Use the Black/ Yellow wire for Negative 3. Push "in" ...

Ad

Question about Alpine Car Audio & Video

1 Answer

...to one of the voice coils. Be sure both amps are getting the same mono signal. Don't run one with the right side of your headunit & the other on the left. It will sound bad & tear up the

Question about Car Audio & Video

1 Answer

...you channels together you got to take the speaker terminal one the left and put a positive on there then go to the right and put the negative on there. that runs your full power of your amp to one ...

...the amplifier rca inputs. the amplifier prolly has left and right speaker leads, you will have to locate a manual, or photo of the mono bridged lead position, if it isnt labeled on the side of the ...

Question about Kenwood Car Audio & Video

1 Answer

...Take a look at this site this amp is what your looking for for any sub you want a mono block it combines internally both the left and right channel into

Question about Jl Audio Car Audio & Video

1 Answer

...one voice coil and the neg from the other voice coil to your amp (positive left and negative right on the amp) If your amp has a switch for momo make sure it is on, some are automatic. Hope this ...

Question about Car Audio & Video

2 Answers

...left or right. This crappy circuit could kill 3 of your 4 speakers, but then with the addition of an after market sub, who knows what kind of monkey business has been committed. Start from scratch in ...

Question about Car Audio & Video

1 Answer

...left channel + negitive into - right channel but make sure the amp can take the speaker impedance load or you will trip the amp or cook it if you over load it. + - +- +- +- PW NW You may also need a ...

Question about Kenwood Car Audio & Video

1 Answer

...Left and right) are working. I had a similar issue when the mono block AMP was only sending signal from the left channel to the amp which in turn was dropping the input load in half. Its all about ...

Not finding what you are looking for?
Kicker 05C104 Car Subwoofer Logo

27 questions posted

Ask a Question

Usually answered in minutes!

Top Kicker Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Kicker Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...