...RAID software." -- https://cs.uwaterloo.ca/~brecht/servers/docs/PowerEdge-2600/en/Pe2600/IT/5j721c70.htm#1058064 > it does detect it on controller initiation. Even when the drive is not spinning, ...
raid 5 configuration. I have 1 bad hard drive. What do i need to do to swap it out for a drive of the same size? Yes. Verify that it is RAID 5 in your RAID config utility, and swap. It may take a
Question about Dell PowerEdge Computers & Internet
...1 logical drive and a spare 36 GB 10 k drive. Its called the JBOD RAID option - just a bunch of discs. I don't know of any system that makes a RAID array an operational imperative, I would say the ...
2600 Im running low in space in the primary HD. I bouth a new 73GB SCSI HD.. I only have one HD I need yo add the new one.. Do I just put it in .. its hot swap? I donĀ“t use RAID.. Just need to add the
Question about Dell PowerEdge Computers & Internet
...2600 with a DVD drive, so a DVD drive IS available .. if you wnat to pay for it :-) ) To confirm, use any other bootable Windows CD (eg XP) ..... 2) I recommend chuck out the useless Take Drive & use ...
...RAID 5. Any help would be greatly appreciated. What controller do you have and are you doing JBOD? 1) Buy same size/style hard drive2) Install it in the hot-swap tray3) Plug it in4) Open up Dell ...
Question about Dell PowerEdge Computers & Internet
2600, with 2X U320 72gb SCSI (on Raid) 1 x IDE CD/DVDRW in Media bay, DAT 27 SCSI (channel B) in the second media bay. 2x 146gb SAS on a DELL SAS pcix card (in 2 of the hot swap bays) and an old 160gb
...2600) 2) Installing the Operating System onto the PERC SCSI Array drives .. a total pain .. with older OS (Windows 2000) you can use the 4 x floppy disk set to install and hit (F6 ? as I recall) to ...
...RAID controller in a 2600 doesn't support RAID 4. You can do RAID 0, RAID 1 and RAID 5. With 3 HDD's your best bet would be a RAID 5. Mirroring is RAID 1 (which would only use 2 of the drives) Ctrl M ...
1 stick of RAM at a time, swapping until you find a bad stick. Also, clean the contacts off with a pencil eraser before putting them in. If this doesn't help, pull PCI cards one by one (except for the
8 questions posted
Usually answered in minutes!
139 Questions
105 Questions
98 Questions
37 Questions
27 Questions