Andis AGC2 Hair Trimmer "blade pull" Questions

Ad

...BGRC clipper they have a lock hinge just pull the blade off with your hand some times they are hard to pull off.you may want to wear a glove so you will not cut your hand when pulling the blade

Ad

Question about Oster Health & Beauty

1 Answer

my oster 76 number 2 blade pulls. i have lubed, used blade wash etc. no luck. its fairly new and no visable damage. The teeth of the blade are not set correctly; look at the top blade and you will see

Ad

Question about Oster Health & Beauty

1 Answer

...change blade out Can not get the blade to release, the lever will not pull it back enough. Push the black latch in towards the blade located behind the hinge assembly this locks your blade into

Question about Andis Health & Beauty

1 Answer

...pull hair It could be one of several problems, but the most likely problem is that the blade is too far back.  There are two adjustment screws on the the blade -- loosen these a tiny bit, then ...

Question about Wahl Health & Beauty

1 Answer

...pull the blade back, it should pop off. When replacing the blade, the blade has a plastic notch on the bottom where is round, insert that notch into the square hole on the trimmer and push back. it ...

Question about Andis Health & Beauty

3 Answers

...pull hair to.there might be a little plate on the inside of the trimmer and its not holding the blades tight.adjust that not to tight though then the trimmer wont cut hair between blades If you've ...

Question about Oster Health & Beauty

1 Answer

...the blade and pull the front edge away from the clipper it will hinge away then you can pull it straight off. As for an instruction manual if you have no luck contact us and we can send one to

Question about Andis Health & Beauty

1 Answer

...blade and at the same time pull the front edge of the blade away from the clipper to release this should simply pull off in a forward direction. Fitting is easier slide a blade onto the tongue of the ...

Question about Andis Health & Beauty

1 Answer

...blades from a AGC2 hair trimmer If you look at the base of the blade at the bottom edge the is a black metal bar, push this in towards the blade and pull the nose of the blade away from the

has been closed accidentally and is locked how do i release it to get blade back on thanks blade latch stuck put a flat bladed screwdriver under the part of the hinge with two ridges on and pull it up

Not finding what you are looking for?
Andis AGC2 Hair Trimmer Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top Andis Health & Beauty Experts

shaveroutlet.com
shaveroutlet.com

Level 3 Expert

1652 Answers

Kolbrun...

Level 3 Expert

1228 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you an Andis Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...