...on the projector for 5 seconds, this will display the Total Used Lamp Time. Press AUTO on the projector to reset the timer to 0. Wait for roughly 5 seconds for the On Screen Display to
Question about Epson Office Equipment & Supplies
I am working on repairing epson projectors that are displaying PINK. On three of them, I changed the Computer Input to AUTO and the pink was removed. However, on the other two this setting changed ...
projector has a "Multimedia Adapter" . You can purchase the adapter from www.trademoon.com or directly from HP. Trademoon is a discount supplier of new and refurbished Compaq and HP parts.You can call
projector and turn off the auto source function, then select the input that you are using.if using a laptop you may have to simultaneously press your FN and relevant 'F' key to send the signal
98 s10 code p0113 blows ecm 1 fuse Blows ECM1 fuse while driving test ignition coils,,,, have ecm and coils tested at auto zone!!
Question about Ipcw Office Equipment & Supplies
WHAT WOULD CAUSE US TO HAVE NO POWER IN 1ST 2ND 3RD GEAR ON A 1998 CHEVY S10 WE CHANGED THE OIL FILTER Did you accidently disconnect the wire to an O2 sensor? Sounds like it is in limp home mode. Take
projector. First I should say that I use a Infocus HDMI convertor to use it on my cable TV box. This almost always works normally, but sometimes it just can't find the TV box and keeps searching for a
RESET THE LAMP HOURS OF PT-LB60EA Go to menu > option > lamp hours. Then press enter on the Lamp Hours for 5 seconds. A new option will pop out asking to reset lamp Hello.i have 3 units Panasonic ...
Question about Epson Office Equipment & Supplies
auto iris error what can be done no display out open the cover , unplug the flexible cables and other cable connectors, open the mainboard, remove the IRIS motor unit, clean the gear after that put in
...auto iris is showin on my projector can can i do at this time 1,Check the fans ,whether the fan is running,when you turn on the projector 2,if the fans run, then ,check the lamp or lamp ballast We ...
31 questions posted
Usually answered in minutes!