Belt Came Out How To Put The Belt Back In take the slip mat and rubber mat off the deck,then lift the platter away from the deck,you will see then the pully which the belt guides around
...Lift the mat from the platter. Lift the platter off the spindle - it just pulls off upwards. Wrap the belt around the sub-platter underneath. If the belt is not stretched, it should stay there by ...
how do you replace the belt? Lift off rubber table mat..then lift off turn table..belt will then be visable..Advise: belt may not need replacing.. check that it has`nt just come off the drive motor..!
The belt is dislodged and the platter will not revolve. Lift the rubber mat off the platter and notice the two large holes for your fingers to fit into. Simply lift the platter off the base by pulling
...does the plastic mat lift up? if so there should be a hole where it can be slipped back on , if it fell off more than likely you will need to replace it and the table should pop off by lifting it
...PS-LX250H for three years now, and gradually a problem has worsened where if I push start, the arm lifts up, moves to the record and begins playing, and then lifts up and returns to its holder after ...
...lift up to get at belt or do we need to undo screws on bottom...many thanks, Tim If the mat lifts up to reveal a hole then you might get at the belt that way. I would have thought that the platter ...
Question about Audio Players & Recorders
...Linear tracking turntable from the 1980's Tone arm stops moving after a very short distance Try lifting up the turntable mat. You should see a hole. Note how it fits before removing the
Question about Sony Audio Players & Recorders
...mat [FIG. 1] from the platter [FIG. 1]. Lift the platter straight up off the spindle [FIG. 1]. Slip the drive belt around the under side of the platter [FIG. 2]. IMPORTANT: Line up the ribbon that is ...
...mat on the platter. Remove the C-shaped clip from the center of the turntable. Lift the platter up and off. Find the flat rubber band that connects platter and the motor. Plug it in and verify that ...
21 questions posted
Usually answered in minutes!
913 Questions
564 Questions
350 Questions
185 Questions
171 Questions
