ION Audio TTUSB10 Turntable "lp 33" Questions

LP grooves - or other? There was no apparent damage to the unit - no kicks or drops. It just seemed to suddenly quit working; i.e., holding down and playing. This is often a problem when you are using

...a 33 rpm LP faster by spinning it at 45 rpm. If you are trying to use this mode you will have to make a software setting to tell the TTUSB10 digital converter program what mode you want to run.

...33-1/3 LP's, I messed around w/ it a little and found a solution. Take the turntable out of the unit & you will find a small circuit board attached to the bottom. On that board is a small square ...

...33-1/3 LP's, I messed around w/ it a little and found a solution. Take the turntable out of the unit & you will find a small circuit board attached to the bottom. On that board is a small square ...

...33 rpm speeds are ok, but obviously cannot play lp,s If you look underneath the deck you will find that the arm is linked by leavers to switches that trigger the motor. Clearly the one that for LP's ...

...LP that was damaged, but when I lifted the arm again to put the needle back the turntable did not spin at all, and just makes a mechanical sound. This happens on the 33 and 75 settings too. Problems ...

...LP to turn I have the same trouble so I gave it a push and after manually spinning the table and then putting through it's sequence a few times it worked fine!....but now it's started to run at a ...

33 skips a lot. Could it be the record, do I need a new needle, any suggestions? My suggestion is ask a friend etc with a turntable to try the new LP and see if it bounces on there's. If it plays your

33 1/3 LP's. First it skips ( plays too fast). Then no sound, very very scratchy, alot of static. Checked the records, and they're in VG quality. Any suggestions? Confirm that the stylus you bought is

...33 lp it speeds buy the songs Yes the platter speeds up until the moment comes. 0'5 sec later and then the electronics take over , want you to try quartz activated and after that quartz put out and ...