Question about Kicker Car Audio & Video
...4 ohm dual voicecoil subwoofers for 1 ohm? I need to wire up 2 4ohm dual voicecoil subs to my amp @ 1 ohm. What is the wiring scematic? thankyou Both + on Both Subs to + Terminal on amplifier. Both - ...
...4 ohm dual how can I run my speakers to where they both are at full power Unless you have a 2 channel amp, the best you can hope for is a 4 ohm load. If you hooked both subs up in parallel, you would ...
Question about Alphasonik Car Audio & Video
...Dual 2 ohm woofers. so you can run one singe sub @ 4 ohm's or 1 ohm. If you have a pair you will be running @ 2 ohm's or 1/2 ohm. (not many amplifiers can handle 1/2 ohm) Here is an in depth guide ...
...dual 2 ohm, 4 ohm, etc. After that, place the black/negative wire/lead coming from the DMM tol the negative terminal of the sub. The place the red/positive wire/lead to ...
...DUAL 4 OHM AND YOU WILL HAVE TO CONNECT THE VOICE-COILS IN PARALLEL WHICH WILL MAKE EACH SPEAKER A 2 OHM SPEAKER AND THEN CONNECT THE TWO SPEAKERS THEMSELVES IN PARALLEL AND THIS WILL PROVIDE YOU THE ...
...4 ohms???? ben JBL Two dual 2 ohm subs cannot be wired in 4 ohms. The only option for you to run those subs off a 4 ohms amp is to wire them in 8 ohms. You will need to wire all the voice coils in ...
dual 4 ohm coils on them. To achieve the 4 ohm load you would want to run the coils in series on each sub,meaning that one of the positives is going to connect to the negative on the sub the remaining
...dual 4 ohm sub? Dual 2 ohm sub can be wired to achieve a 1 or 4 ohm load. Dual 4 ohm sub can be wired to achieve a 2 or 8 ohm load. Usually no difference in Theile Small Parameters.... Only wiring ...
...Dual 4 ohm, and Dual 2 ohm, so you have to know what impedance your coils are prior to wiring. HERE is a nifty little guide that will show you how to wire your subs. DO NOT WIRE THE SUBS LOWER THAN 2 ...
Question about Dual Car Audio & Video
...dual coil 4 ohm subs how does it need to be wired Is the amp a single channel? If so, the only way to connect the subs (without overloading the 2 ohm stable amp) is to wire each sub's voice coils in ...
1 questions posted
Usually answered in minutes!
31 Questions
19 Questions
11 Questions
12 Questions
9 Questions