2008 Toyota Sienna "install light switch headlights 2006" Questions

Ad

...install a remote start for our 2006 Toyota Sienna and have managed to make almost all connections save one: we are unable to find the correct wire for the parking lights. The wiring info we have ...

Ad

Question about Toyota Sienna

1 Answer

light will flash when car is remote started but will not turn on when put the key in and turn on the headlights or parking lights. Per Sixth ave when they install the remote start they bypass the fuse

Ad

headlight switch which is also the turn signal switch, another way is to install a fog light switch, this will not be as the factory setup which works off the headlight switch but will save some money

...light module for an '06 Mustang (4L, convertible if it matters). I have a U.S. car brought into Canada, which required the DRL's to register it here. The shop that installed the module butchered it & ...

install a H.I.D kit when the lights started flickering then went out. Please help. this sounds like a bad head light switch, you have replaced the bulbs and all fuses are good then i would say try the

...switch today, no difference. Checked head light plug with volt meter, 3 prongs were 12 volt on hight beam on low beam one prong goes to 6 volt and the other two stay at 12 volts. Could be a defective ...

Question about Toyota Sienna

2 Answers

...light tells me if my Daylight Running Lights are on but they don't come on when I start the engine. I can't find a fuse or can't figure out which one it could be. I can't find a switch either. I can ...

...on how do I fix this install a new switch in the tranny, or into the center console of the cabin (depending on it's actual location ) the old one is either faulted all together or soon will

...headlights on my 2006 mustang and would like the drls to come on with the ignition rather than turning on the parking lights. Your suggestions? Connect the hot weir to hot weir when you turn the ...

...light conditions. The headlamp relay receives battery positive voltage directly from the battery. The BCM supplies a ground signal to the headlamp relay for normal headlight operation. The BCM also ...

Not finding what you are looking for?
Cars & Trucks Logo

486 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...