tranny problem 1972 corvette have viberating when shifting into 1st or reverse Sounds like the flywheel needs machined. It is probably heat checked (burn marks) on the surface. Like a warped rotor, ...
front end noise I changed the front lower motor mount and now the motor viberates when in reverse As a rule when one engine mount is shot the rest are not far behind. Check the rest for the rubber ...
COROLLA 1999 TROUBLE SHOOTING my car starts well and run good when the engine still cold after a minute or 2 it starts to viberate and lights are going weaker and feels like it will be turn off also ...
Question about Toyota Camry
...wires, new distributor cap and rotor, and changed the oil. It ran alot better but still a little viberation, so I replace the ign. coil. Then there was no spark from the coil to the distributor
When stopping in drive position the transmission grinds - shift to nuetral- OK. Shift to reverse it grinds. After couple minutes, in stops grinding. Any suggestions? there are a few posibilities.I ...
...viberation happens only when its in "R" (reverse) and "D" (drive). When I have the car in "P" (park) and "N" (neutral) it does not viberate at all. I would like to know what we can to do solve this ...
Transmission acts as if it does not want to engage 2002 Chevy Silverado 1500HD 4X4. Transmission acts as if it does not want to engage in reverse. RPMS must beat around 3500+ to initiate motion. Drive
it viberates all the time Probably a bad front motor mount. It could be a transmission mount, but these usually vibrate in forward or reverse.
441 questions posted
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,134 Questions