where to find 510 resistor for my temp compass tacoma 05 HUH?
...510 ohm resistor and one was loose. I went to Autozone and bought an electrical soldering tool for about $9 and WALA! My display is working again. Thanks for the assist Schaefer! The failure of the ...
...compass is connect with two connectors (easily uncouple) remove the display cover. You will see two small '510' chips. The lower one is the culprit. You'll see the solder melted away on one end. Just ...
...resistor. i put a little pressure on the 510 spot and to my amazement it lit up. YAHOOOOOO!!!!!!!!!! now i just have to have it soldered. i have a friend that builds circuit boards so im sure its a ...
...compass stopped working, is there a fuse for it cause i cant find one Sir, I do not know if you had repaired your unit or not but I will detail my experience in repairing my unit today. I had exactly ...
...510' resistors and look for disconnection. Mine was very easy to see. 9. Press down resistor and solder broken end. I chose to solder both ends of both 510s to make sure I won't be back in there. 10. ...
620 questions posted
Usually answered in minutes!
307 Questions
394 Questions
295 Questions
304 Questions
277 Questions
