2006 Toyota Sienna "rear drum brakes rusted" Questions

...rear rotor from my 2006 Toyota Sienna AWD. The old brake pad wore down and bit into the rotor, which I'm trying to change. I've released the emergency brake, and removed the caliper and caliper arm, ...

...drum brakes on the rear of the vehicle are NOT self adjusting and must be adjusted about every 30,000 miles, if the brakes are to tight then the brakes will tend to get hot and be too sensitive, this ...

...rear brake drum job completed, they will likely "turn" your rear brake drums - which means they will put the drums on a mechanical lathe that will scrape any uneven surface into one congruous even ...

rear weel drive lock up in reverse but not going forward Drum brakes. Could be the e brake cable rusted and holding the brakes to close to the drum. Or the brake parts has fallen apart inside the drum

...rear brake to stick occasionally in the drum ? If i loose the bleader it ok , the wheel turn slighly. if it's drum brake, remove the drum and check for dust collected inside the drum. also check the ...

...rear drum on a jeep Compass How do you remove the rear drum on a 2008 Jeep Compass. I have removed the tires and the drum is stuck on. I tried smacking it with a hammer all around and still nothing. ...

...rear of brake back plate. back off brake pads and the drums should slide off. occasionally the drums are groved and rusted so you will need to tap on the drums with a dead blow hammer to help free ...

...rear on drum brakes, or same on rear disc caliper 3/ Collapsed Rubber Brake Hose 4/ ABS System Issues 5/ Worn Out or Broken brake parts 6/ The most common cause of any Brake Problem is -- ...

...tight by hand at each rear drum brake & when you letgo they pull back into the drum & rear wheels turnfreelyThen you work on the cables & any rust you have to remove,so they can be ...

...rear drum brakes do not use a STAR ADJUSTER. They use a "quadrant" adjuster attached to emergency brake cable I think. You'll see it coming out the back near top of backing plate. I don't think you ...