2005 Toyota Highlander "vsc system reset" Questions

Ad

Question about Toyota Highlander

1 Answer

...vsc system is inactive. I got this light last week and went to jiffylube who connected the computer and pulled the error code. Then reset the light and its fine since then. i would suggest you to go ...

Ad

VSC and Check engine light to be turned off, you will need to open the fuse box, right-side of the engine compartment, and pull the 20 amp EFI fuse for 10 seconds. This will reset the system. The fuse

Ad

...VSC light and Trac control come on in my 2005 Toyota Highlander. Any solutuions? i just went threw that with my gf,s 05 highlander. auto zone said it was gas cap. i changed the air filter n it came ...

...reset the vsc lights on lexus gs430 sport year 2000 VSC - Vehicle stability control. Can not be reset, will have to take it in for service, vsc pick up a code on your system, have it checked out

Question about Toyota Highlander

2 Answers

...VSC system will glitch out and a Steering Angle relearn is necessary, it takes about 3mins to perform and a good quality scan tool with 2004 current software. Good Luck. Check your fuses. That was my ...

Question about Toyota Highlander

2 Answers

vsc trac The Oxygen sensor can influence automatic transmission and it is used by electronic injection system, but does not affect the traction control system. The problem is because you reset the car

...VSC system doesn't have anything to do with your gas cap, unfortunately. You're going to either need an OBD2 Scanner to read the messages for your check engine light or take it to a ...

any time check engine light comes on. repair engine light problem, reset computer monitoring system and vsc light will go off. must scan computer to pull codes for check engine light and go from there

...system in the car. After replacing main fuse other fuses the VSC, Track Off, ABS and Break light warning lights are on. Any way to reset these warning lights try to read and clear the fualt code with ...

...VSC OFF all remain on after start up No acceleration/power This only started after battery was removed then replaced How do I fix this? you have to clear and reset the computer Have vehicle scanned ...

Not finding what you are looking for?
2005 Toyota Highlander Logo

515 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...