...belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley. 7 Release the pressure on the self tensioner and ...
...replace belt or belt tensioner. Seeing how we have no information on your vehicle and engine, lets start with checking for any adjustment that could be tightened to stop it, and if it is a tensioner ...
...tension pulley. The tension pullies are usually spring loaded so if you need to have the belt replaced there should be a nut on the pulley that you have to put a socket and a long bar on to ...
...so for the top one. To replace the lower belt, remove the right front tire and the splash shield to get to the lower part of the engine for the power steering belt. Toyota Sienna serpentine belt ...
...will need to replace your belt tensioner in order for your belt to tighten.another reason could be that it is time to replace your serpentine belt.hope this info helps.take care and good luck, ...
Question about Toyota Sienna
...belt. Replace belt and reverse prosedure. DO NOT OVERTIGHTEN BELT,as you can damage pullys and or belt. Tighten to factory specs. Rule of thumb is pulling the belt out and check for slack. No ...
...tensioner for the lower belt. For serpentine belt replacing and diagram details,click the link ...
...belt, it should have an auto tensioner. Same goes for the timing belt. There is no adjustment. If the belt is loose then it needs to be replaced. Replacing timing belt,Sienna 1998: 1.Disconnect ...
How do you tighten a serpentine belt on a 1999 Toyota Sienna? you don't. if belt is loose or coming off then you need to replace the belt tensioner
...serpentine belt. I would recommend that you check the tension of the belt. If the belt is worn, a replacement would be
1,031 questions posted
Usually answered in minutes!
501 Questions
377 Questions
382 Questions
333 Questions
274 Questions