2004 Toyota Sienna "remove lower instrument panel 99" Questions

...remove audio control on the steering wheel, 3) loosen two torx screws, pull up air bag module, 4) detach airbag wire connector. After these steps, I pushed and tested the horn push-points, also tried ...

...remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring ...

...lower edge of the bezel. If no screws are present, then remove the bezel by pulling it straight out.   5. Unfasten the four screws retaining the instrument cluster to the instrument panel, ...

LOWER INSTRUMENT PANEL COVER.REMOVE THE IGNITION SWITCH.REMOVE THE RETAINING NUTS AND LOWER THE STEERING COLUMN.THE LOCK ASSEMBLY IS CLAMPED BY TWO SHEAR HEAD BOLTS.USE A CENTER PUNCH TO MAKE A DIMPLE

...Remove the right and left lower instrument panel insulators. On 1988?93 vehicles: Remove the 3 glove compartment hinge screws, disconnect the check arms and remove the glove compartment. Loosen the ...

...Remove the right and left lower instrument panel insulators. On 1988?93 vehicles: Remove the 3 glove compartment hinge screws, disconnect the check arms and remove the glove compartment. Loosen the ...

...Remove the upper and lower steering column shrouds. Pull the flasher from the back of the multi-function switch. To install: Install a new flasher in the multi-function switch. Install the column ...

lower insulator. Remove the pin-type retainers. Disconnect the courtesy lamp. Remove the LH instrument panel insulator. Position the LCM aside. Remove the screws. Release the locking tab. Position the

...remove the sound insulator on the right side of the passenger footwell to replace these fuses. Open this and you will see a bunch of relays and in the lower left hand corner is 4 rows of 3 fuses. The ...

...Remove all screws holding the lower panel above the pedals, and remove the panel - be careful, the hood release is mounted in this panel. Also, the electronic diagnostic port screws are also securing ...