2004 Toyota Sienna "gearshift back park" Questions

...back-up light circuit when the gearshift lever is placed in REVERSE. 2 Prior to checking the switch, first make sure the shift cable is adjusted properly (see Section 4). 3 Raise the vehicle and ...

...gearshift and releasing it out of park. This problem started after I took it back to the dealer to fix all the recalls. Could they have done something wrong or what could the problem be? How can this ...

...be removed with a small screwdriver. Once removed, there is a white switch revealed. When you push down on the switch while pulling back on the gearshift lever, you will be able to shift out of

...gearshift cable.the bracket that holds this cable has 2 or 3 screws and over time will back out and cause shifting problems. thay need to be tightend. these screws have torx bit heads on them so you ...

gearshift lever from detent to detent and compare with the transmission settings. Readjust if necessary. Install the upper instrument panel steering column cover; refer to Section 501-12 . -----------

back in park same problem . brake light switch not working the brake light switch needs to be repaired first before you can accurately diagnose the shift interlock system. the brake light switch sends

back up lights dont work bulbs r good First check the fuse. If good then the problem is mostly likely the switch on the gearshift. This switch can be pushed out of place or broke. With the car running

...gearshift will not move from park,I have press the brake pedal need more info but it could be blown fuse back left of hood compartment 20 amp fuse (stop fuse) it works a little selinoid when you step ...

...gearshift lever back in the PARK (P) position, remove the fluid level indicator (7A020), wipe it clean, and replace it, making sure it is securely seated in the oil filler tube (7A228). NOTE: Use the ...

gearshift stuck in park Push and pull car back and forth and remove gear-shift from park .