...remove steering column cover, turn on LEFT turn signal (yes, the one that is working), then you will hear a clicking sound. locate the relay that causes the sound. there you can see 2 relays (one for ...
...remove a toyota tundra relay Do they just plug in? ?Will not eaisly come out. Most relays just pull out of the sockets, some have plastic release tabs on the side that have to be released using a ...
...beams came on, when activated. Turned engine on/off, remove key, restarted engine, still nothing. Could this be due to a weak battery, or, fuse? Baffeled. Check for a plug in relay in the fuse
...looks like a fuse box,but instead holds relays. these should be marked for what they service. just remove the one that controls the
Night heads lights not switching on. Engine started up, turned head light switch on, but, only the parking and dash lights came on, after many attempts. The high beams worked when switched on, so I ...
...remove the fuse every time to turn them off and then put the fuse back in when driving again. brake switch broken or relay, to same. alldata.com has the drawings. they are clear. why not unplug brake ...
...time. no guessing. the the mains are huge too bad you never told what exactly what you did., 1: removed battery plus cable first (wrong) and wrench hit steel>? 2: installed the battery ...
relay but maybe not enough to the starter,, or, your starter could be on its last leg,, , what I would do , remove the starter ( yes its easy to do, remove the battery cables first , the starter has 2
...you DO remove the intake, you MUST replace the intake manifold gaskets, or your engine will not run properly, due to air leaks at the intake mating surfaces. check starter relay
...turning it on or running. Try this: SAVE radio code and remove the negative battery cable,turn on the headlight switch for 30 seconds,turn back off,start truck. That MAY re set the alarm
384 questions posted
Usually answered in minutes!
370 Questions
251 Questions
194 Questions
168 Questions
181 Questions