2002 Toyota Tundra "rear brake" Questions

...rear brake lights work with the head lights on, but do not work when you depress the pedal. So the lamp is good, but the intermediate wiring is not. The cab light works with the brakes, but not the ...

...have air in the line of my 02 Tundra Xtra cab. Where are the ports to bleed the air? They are on the front and rear brake calipers ,or ,on rear drum brakes if equipped they are on the wheel ...

rear rotors and brake pads and there is a grinding noise Here is what I have found out. I have an 2008 Toyota Tundra 5.7 4x4, and I changed the rear brakes and rotors. No noise prior to service. After

...brake master so that would be rear passenger side wheel than rear driver side wheel, passenger side wheel last would be driver side wheel. you may need an assistant on doing this. 1 to pump the brake ...

rear end. Loosen but do not remove the leaf springs and the shock absorbers. Remove the brake lines and the emergency brake cable. Return vehicle to ground and finish removing the leaf springs and the

REPLACED REAR DRUM BRAKES THIS PAST SUMMER AND NOW EVERY ONCE AND A WHILE THEY WILL NOT WORK AND I HAVE NO EMERGENCY BRAKE Try adjusting the emergency brake cable underneath the vehicle.

the whistling sound slowly whines down after the engine is off. Brake fluid is ok and had the rear brakes changes 3 months ago. A/C, and vents make no difference in sound.. Brake booster seal leaking

REAR BREAKS VIBRATE WHEN APPLYING BREAKS. If it has drum brakes get the drums machined or if it has discs get the discs machined to stop the vibration as with age and heat and water splashes over time

rear brake shoes, how do i go about getting the drum off The drum slides off of the lug bolts. The lug bolts stay on the shaft. Disengage parking brake. You may have to bleed the brake cylinder if the

2007 tundra brake pad replacement FRT OR REAR.. IF DISC. REMOVE CALIPER BOLTS. EMOVE CALIPER REEPLACE PADS. MAKE SURE YOU USE BRAKE QUITE BEFORE INSTALLING PADS.. PREVENTS PAD NOISE