2002 Toyota Corolla "high idle start" Questions

...idle is very high then shuts down I have 2004 toyota carolla with a remote start when starting the car idle is very high then shuts down most likely idle air control valve on throttle body remove ...

...idle is to high even when changing gears the idle starts high.i change the distributor cap and rotator. the TPS or idle control solenoid faulty

sticky throttle body (can be cleaned )

...

...idle is too high. How does one adjust the idle? The engine has a two-barrel carburetor. I don't see any idle stop screw or idle mixture screws. All the vacuum hoses look good... no cracks, no breaks, ...

...high idle is brought about by the auto choke whose purpose is to hasten the reaching of operating temperature of the engine. The fact that the idle RPM goes down after some time is a good indicator, ...

...high idle/overheating 1989 Toyota Carona GLXi 2.0 litre DOHC fuel injected. (New Zealand/Japanese import) I have 2 problems, and probably related. the car is overheating (heaters have stopped working ...

...high idle when I start the car in the morning is a potential problem? This idle condition is normal for a cold start, the computer is controlling the idle for proper fuel burn. It is not necessary to ...

...idle is so high about 1500rpm i already clean the trolley how can i adjust the idle please help Hi Loret, The idle control is electronically controlled. If the idle speed is too high, its likely that ...

...High idle indicates that the engine most likely has a vacuum leak. This could be due to many causes; cracked hose or hoses, bad gaskets..ect. Hard to say exactly without more info, but you can open ...

...idling is very high,the idling will goes normal when it reaches the temperature and pump the accelerator.Im worried for the worst case scenario that will occur. just adjust the auto choke idle ...

1988 Toyota DX starts and idles fine until the engine warms up then will either Idle very high (2000 rpm) or stalls. What could cause this? air leak.check your hose to the servo.