turn signals it does NOT work, no lights emit or nothing. you may have a blown fuse. that would be where i would look first. Flasher and fuses are usually under the dash next to the drivers left knee.
...fuse-puller). You can use a pointed nosed pliers (or similar) to remove fuses..... The rain would not effect the turn signals unless you had a water leak into the flasher unit itself ! The A/C has to ...
...signal and 4-way hazard flasher not working the turning signals and the 4-way flasher do not work. The 10 amp fuse looks fine; and, when changed with a new one still did not work. Where do I go from ...
...turn signals not working... any ideas? Had same problem. Our trailer electric wiring harness had a bare wire that shorted when it touched the meatl trailer hitch. This blew a fuse. The fuse that it ...
turn signal & 4-way flashers left & right turn signal does not work and the emergency flashers do not work. All fuses are good and bulbs all work. Hi dwilley58....Replace the flasher unit.... Regards ...
Turn signal and flashers not working on a 1999 Toyota sienna van checked all fuses and relays. Need help. Look at the turn signal switch. They go bad too.
turn signals not working With ignition turned on, check to see if brake lights are working. If not check for a blown fuse. See owners manual for location. If it not a blown fuse it is probably the ...
...turn signal and the hazard won't work. Is my relay gone?? Which relay are you referring to? If you don't know, we don't We guess at most things, if the question has something to go by ! ...
...are on the right track. More than likely it is a defective flasher relay as one relay controls turn signal and hazard flash. The flasher relay is located behind the left side of the instrument
turnn signals and flashers not working turn signals and flashers not working Flasher fuse or brake light switch
638 questions posted
Usually answered in minutes!
572 Questions
501 Questions
377 Questions
333 Questions
274 Questions
