2001 Toyota Sienna "castles" Questions

Ad

Question about Toyota Sienna

2 Answers

replace the tie rod on a 1998 sienna 1 PUT ON YOUR EMERGENCY BREAK, LOOSEN THE WHEEL NUTS ON THE FRONT WHEELS,JACK UP THE CAR AND REMOVE THE FRONT WHEEL. WITH SOME YELLOW PAINT ,MARK THE THREADS WHERE

Ad

how do you remove the 2008 sienna castle nut to change wheel bearings? how do you take it out so you can replace the wheel bearings? You need a 3 foot long breaker bar or impact gun I own a 3 foot ...

Ad

Question about Toyota Sienna

1 Answer

remove a stuck tie end tod The tie rod is a tapered fitted once the castle nut is off a pickle fork is beaten into the space between the rod and steering arm and falls out . no pickle fork then look ...

Question about Toyota Sienna

1 Answer

torque specs for 68 roadrunner ball joints in 1968 roadrunner you tighten castle nut until becomes tight.then tighten little more to to line up castle nut hole with ball joint stud hole.then install ...

Question about Toyota Sienna

1 Answer

need torque scecs for control arm 1) Install or connect the following:Lower control armControl arm bolts and nutsBall stud to the knuckleBall stud castle nut, tighten the ball stud castle nut to 22 ft

Question about Toyota Sienna

1 Answer

need wheel bearing torque replaced front brakes on 98 ranger 2wd.need wheel bearing torque Spin the rotor and tighten the castle nut untill tight. go tighter untill your carter pin hole lines up with ...

torque specs for castle nut and lock nut to inner tie rod tighten tight by hand then line up the cut out in the castle nut to the hole in the tie rod and insert cotter pin and bend pin so it will not ...

Looking for upper and lower ball joint torque specs 2005 Toyota sequoia Just looking for tightening castle nuts What is theTorque on front ball joints 2005 Toyota sequoia ... ...

Question about Toyota Sienna

1 Answer

how do i change outter tie rod Prepare your tie rod and install the grease fitting provided with it. 1. Jack up vehicle and secure on jack stand 2. Remove wheel 3. Turn steering wheel so that access ...

SC2. What is torque for: lower control arm to frame, lower control arm to sway (torsion) bar, ball joint castle nut, and tie rod castle nut? Frame bolts, I run to around 120 +or -. Ball and tierod, ...

Not finding what you are looking for?
2001 Toyota Sienna Logo

638 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...