2001 Toyota Echo "back left brake grinding" Questions

...back wheel brakes that are worn out? Slowly apply the park brake while driving in a safe area. If the noise is present the rears are the area of concern as these are the only brakes applied. If the ...

...then come right back. it has a brand new axle and wheel bearings in it. This sounds like the anti-rattle springs where left out of the brake calipers. does the noise go away when you hit the

...left or when braking Grinding is a sign on brakes in need of replacement. Your pads are worn through and now the metal backing plate of the pad is grinding up against the rotor. Replace the pads and ...

...tire The brakes grinding because it needs to be changed not enough brake pad left. Pulls go one side alignment could be out of adjustment. Go back to where had work done and say still having ...

...left side, it would be to your advantage to repalce both sides. Additionally, pls have the disc themselves checked as they may need re-surfacing. Hope this be of initial help/idea. Pls post back how ...

left side of trany or axle. it is not the brakes i check them what could wrong. Check the brake backing plate, it may be touching, then while you have the wheel off check the CV joints for torn rubber

left front brake grinding noise on first few brakings and then it stops for the rest of the day. The dealer said it is common and I had it fixed under warranty once but it is back again. I want to fix

...left. Replaced the pads the next day and the constant grinding was back. I also noticed that the front end seemed like it was sitting a little low. I looked and the spring was rubbing on the tire, ...

...I need to change thr rear brake shoes and drums even if they still a lot of shoes left. This sounds like the wheel cylinders is leaking a little fluid. this causes the drums to stick a little ...

...left pretty bad little to no noise turning riht and its not breaks thinking it might be cv joint what do you think is the steering over locking,and catching the track rod end is it a wheel balancing ...