2001 Toyota 4Runner "bayonet fitting" Questions

...bayonet or screw fitting then simply unplug the lamp at the socket then use a potato cut in half to either push down and undo a bayonet or push onto the remains of a screw bulb and unscrew it. Ensure ...

...Ford Focus Can't grip installed bulb base firmly enough to twist bayonet mount free. common problem,the base gets corroded to the fitting,once the glass has broken,use pliers to twist and pull

I need to remove a T210 light fitting for a bayonet bulb on a standing lamp, but dont know how There should be a nut at the base of the lamp that holds the whole thing together.

...same time seems to be the only way. rheumatism in the hands is my problem , any ideas? You are right you need to hold the disk on the outside and push upwards and turn to locate the bayonet

...screw holding the light cover on either at the front or behind bumper then the bulb will just be a bayonet ...

...bottom of the mirror housing and move it side to side. The mirror is probably held in a sort of cage in a bayonet type fitting. It's really clear when it's out but the first time can be awkward.

...complete with bulb pull it out then fit new bulb make sure bulb is correct one! ie the locating bayonet pins are same ? then refit socket with new bulb in reverse sequence test ...

...with one hand ready to "catch" the headlight, turn the tool until headlight pushes forward. Then remove headlight by hand and replace globe as required. Be careful of bayonet fitting. Can be

...of the vehicle. The bulbs are easily accessible once the cover pops off. they are a 1/4 turn bayonet mount. Simply turn the lamp mount (where the wires go through) ccw and the base will come ...

Can I use 1157A instead of 1156 for the turn signal in my 94 geo metro? No. They will not fit the bayonet holder. Note the location of the locking nubs on the bulbs are different. So they will not ...